GPIO

Logic Analyzer

A 1.5mhz two-channel logic analyzer, with configurable pin channels, sample rate, and amount of samples to take

Usage

1

Start acquisition

Press the joystick - the screen will go blank as it's acquiring samples

2

Zoom in

Press joystick up - you can hold to speed it up

3

Zoom out

Press/hold joystick down

4

Pan right/left

Press/hold joystick right or left

5

Edit configuration/export recorded samples

Press key 1, and scroll all the way down to export samples

6

Snap to next falling/rising edge

Press key 2 - be warned, sometimes it may look like there is no edge, but you may have to zoom in a bit

7

Clear recorded samples

Press key 3

Playground

A GPIO playground to mess with PWM, buzzers, servos, etc.

More to be added soon.

Usage

1

Pick pin

Select which pin you want to mess with

2

Pick what pin mode you want to set

This could be PWM, a basic high/low output, a servo output, a buzzer, etc.

3

Configure the pin mode

PWM allows you to edit PWM frequency, value, and if you want it to pulse - while the basic output only allows you to turn it on and off.

4

View status of pins in the playground menu

The same place where you pick pins, you can also see the pin statuses - if it's PWM already, if it's on or off, servo angle, and more.